 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Schottky barrier diode RB095T-60 Applications Switching power supply Dimensions (Unit : mm) Structure Features 1) Cathode common type. (TO-220) 2) Low IR 3) High reliability 6 (1) (2) (3) Construction Silicon epitaxial planer Absolute maximum ratings (Ta=25C) Parameter Reverse voltage (repetitive) Reverse voltage(DC) Average rectified forward current (*1) Fprward current surge peak (60Hz / 1cyc) Junction temperature Storage temperature Symbol VRM VR Io IFSM Tj Tstg Limits 60 60 6 100 150 -40 to +150 Unit V V A A C C (*1)Business frequencies, Rating of R-load, 1/2 Io per diode, Tc=130C Electrical characteristic (Ta=25C) Parameter Forward voltage Reverse current Thermal impedance Symbol VF IR jc Min. - Typ. - Max. 0.58 300 3.0 Unit V A C/W Conditions IF=3A VR=60V junction to case www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 1/3 2010.02 - Rev.D RB095T-60 Electrical characteristic curves 10 Ta=150C REVERSE CURRENT:IR(uA) FORWARD CURRENT:I F(A) Ta=125C 1 Ta=75C Ta=25C Ta=-25C 1000000 100000 10000 1000 100 10 1 0.1 0.01 0 100 200 300 400 500 600 700 800 0 10 20 Data Sheet Ta=150C Ta=125C Ta=75C CAPACITANCE BETWEEN TERMINALS:Ct(pF) 1000 f=1MHz 100 Ta=25C 0.1 10 Ta=-25C 0.01 FORWARD VOLTAGE : V F(mV) VF-IF CHARACTERISTICS 30 40 50 60 1 0 5 10 15 20 25 30 REVERSE VOLTAGE : V R(V) VR-Ct CHARACTERISTICS REVERSE VOLTAGE : V R(V) VR-IR CHARACTERISTICS 550 Ta=25C IF=3A n=30pcs 200 180 REVERSE CURRENT:IR(uA) 160 140 120 100 80 60 40 20 AVE:20.8uA Ta=25C VR=60V n=30pcs 800 750 CAPACITANCE BETWEEN TERMINALS:Ct(pF) 700 650 600 550 500 450 400 350 300 AVE:514.4p Ta=25C f=1MHz VR=0V n=10pcs FORWARD VOLTAGE : V F(mV) 540 530 AVE:532.4mV 520 510 500 0 VF DISPERSION MAP IR DISPERSION MAP Ct DISPERSION MAP 300 RESERVE RECOVERY TIME:trr(ns) PEAK SURGE FORWARD CURRENT:I FSM(A) 250 200 150 AVE:73.0A 100 50 0 Ifsm 1cyc 8.3ms 30 25 20 15 10 5 0 trr DISPERSION MAP AVE:8.30ns Ta=25C IF=0.5A IR=1A Irr=0.25*IR n=10pcs 1000 Ifsm 8.3ms 8.3ms PEAK SURGE FORWARD CURRENT:I FSM(A) 1cyc 100 10 1 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 IFSM DISPERSION MAP 1000 Ifsm PEAK SURGE FORWARD CURRENT:I FSM(A) t 100 IM=100mA 10 IF=3A TRANSIENT THAERMAL IMPEDANCE:Rth (/W) 1ms time 300us Rth(j-a) FORWARD POWER DISSIPATION:Pf(W) D=1/2 5 Sin(=180) DC 10 100 1 Rth(j-c) 10 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS 100 0.1 0.001 0 0.01 0.1 1 10 100 1000 0 2 4 6 8 10 TIME:t(s) Rth-t CHARACTERISTICS AVERAGE RECTIFIED FORWARD CURRENT : Io(A) Io-Pf CHARACTERISTICS www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 2/3 2010.02 - Rev.D RB095T-60 15 0A 0V AVERAGE RECTIFIED FORWARD CURRENT:Io(A) DC 10 D=1/2 Io D=t/T VR=30V Tj=150 AVERAGE RECTIFIED FORWARD CURRENT:Io(A) t T VR 10 DC D=1/2 Data Sheet 15 15 0A 0V t T Io VR D=t/T VR=30V Tj=150 REVERSE POWER DISSIPATION:PR (W) 10 Sin(=180) D=1/2 5 DC 5 5 Sin( =180) Sin( =180) 0 0 10 20 30 40 50 REVERSE VOLTAGE:V R(V) VR-PR CHARACTERISTICS 60 0 0 25 50 75 100 125 AMBIENT TEMPERATURE : Ta() Derating Curve"(Io-Ta) 150 0 0 25 50 75 100 125 150 CASE TEMPARATURE:Tc() Derating Curve"(Io-Tc) 30 No break at 30kV ELECTROSTATIC DISCHARGE TEST ESD(KV) 25 20 15 10 5 0 C=200pF R=0 C=100pF R=1.5k AVE:12.7kV ESD DISPERSION MAP www.rohm.com (c)2010 ROHM Co., Ltd. All rights reserved. 2/3 2010.02 - Rev.D Notice Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no responsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices). The Products specified in this document are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. ROHM Customer Support System http://www.rohm.com/contact/ www.rohm.com (c) 2010 ROHM Co., Ltd. All rights reserved. R1010A |
Price & Availability of RB095T-6010
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |